Tp-link TL-WN310G Bedienungsanleitung PDF herunterladen (Seite 25)

TL-WN310G 54M

Wireless

Adapter User Guide

- 19 -

¾ Power Save Mode -

• Maximum - Selects maximum mode to let the access point buffer incoming messages

for the wireless adapter. The adapter will detect the access point if any messages are

waiting periodically.

• Normal - Normal uses maximum when retrieving a large number of packets, then

switches back to power save mode after retrieving the packets.

• Off - Turns power saving off, thus powering up the wireless adapter continuously for a

short message response time.

¾ 802.11b Preamble: Specifies the preamble setting in 802.11b. The default setting is Short

& Long (access point mode), which allows both short and long headers in the 802.11b

frames. The adapter can only use short radio headers if the access point supports and

uses them. Set to Long Only to override allowing short frames.

¾ Wireless Mode: Specifies 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps operation in an access

point network. The wireless adapter must match the wireless mode of the access point with

which it associates.

¾ QoS: Select this option, the adapter will provide Quality of Service for the wireless

connection.

¾ Wireless Mode when Starting an Ad Hoc Network: Specifies 2.4 GHz 54/11 Mbps to

start an Ad Hoc network if no matching network name is found after scanning all available

modes. This mode also allows the selection of the channel the wireless adapter uses. The

channels available depend on the regulatory domain. If the adapter finds no other ad hoc

adapters, the channel that the adapter starts the ad hoc network with will be selected

automatically. The wireless adapter must match the wireless mode and channel of the

clients it associates.

¾ 802.11 Authentication Mode: Select which mode the wireless adapter uses to

authenticate to an access point:

• Automatic causes the adapter to attempt authentication using shared, but switches it

to open authentication if shared fails.

• Open System enables an adapter to attempt authentication regardless of its WEP

settings. It will only associate with the access point if the WEP keys on both the

adapter and the access point match.

• Shared-key only allows the adapter to associate with access points that have the

same WEP key.

For infrastructure (access point) networks, click Preferred APs… to specify up to four access

points to the client adapter that attempts to be associated to the access points. The four access

points have different priorities; the frontal has the higher priority.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Keine Kommentare

Tp-link TL-WN310G Bedienungsanleitung Seite 25