TP-LINK T1500-28PCT (TL-SL2428P) Betriebsanweisung Seite 17

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 183
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 16
9
SFP Ports: Designed to install the SFP module. T1500-28PCT features some SFP transceiver
slots that are shared with the associated RJ45 ports. The associated two ports are referred as a
"Combo" port, which means they cannot be used simultaneously, otherwise only SFP port
works. Meanwhile, the associated two ports share the same LED. For T1500-28PCT, Port 27
shares the same LED with Port 27F and Port 28 shares the same LED with Port 28F.
Note:
When using the SFP port with a 100Mbps module or a gigabit module, you need to configure its
corresponding Speed and Duplex mode on SwitchingPortPort Config page or through
Telnet. For 100M module, please select 100MFD while select 1000MFD for gigabit module. By
default, the Speed and Duplex mode of SFP port is 1000MFD.
2.3.2 Rear Panel
The rear panel of T1500-28PCT features a Kensington security socket, a power socket and a
Grounding Terminal (marked with
).
The rear panel of T1500-28PCT is shown as the following figure.
Figure 2-2 Rear Panel of T1500-28PCT
Kensington Security Socket: Secure the lock (not provided) into the security slot to prevent
the device from being stolen.
Grounding Terminal: T1500-28PCT already comes with Lightning Protection Mechanism. You
can also ground the switch through the PE (Protecting Earth) cable of AC cord or with the
ground cable.
AC Power Socket: Connect the female connector of the power cord here, and the male
connector to the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz 3.5A).
Return to CONTENTS
Seitenansicht 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 182 183

Kommentare zu diesen Handbüchern

Keine Kommentare