1 Connect to the Access Point with the Ethernet cable or via wireless. The default SSID of the Access Point is T
10 T1. How do I restore my Access Point’s configuration to its factory default settings? T2. What can I do if I forget my password? 1) Resto
11 Click Change adapter settingsClick Properties Right-click Local Area Connection Double-click Internet Protocol Version 4 (TCP/IPv4)
12 Now, try to log on to the Web-based configuration page again after the above settings have been configured. If you still cannot access the config
13 Turn off all your network devices, including your computer(s), power injector and the AP. Connect your computer
Technical Support For more troubleshooting help, go to: www.tp-link.com/support/faq.asp To download the latest Firmware, Driver, Utility and U
2 Login Wireless Settings A dialog box will prompt you for the User name and Password.Enter the default values and click OK. Note If th
3 A. Access Point Mode Introduction In this mode, the product will act as a wireless central hub for your wireless LAN clients, giving a wirel
4 After the settings above, please go to Network Settings on page 8 to continue the configuration. B. Multi-SSID Mode Introduction In this mode, t
5 Settings After the settings above, please go to Network Settings on page 8 to continue the configuration. Select the repeater mode, for exam
6 D. Bridge with AP mode Introduction In this mode, the product can wirelessly connect two or more remote LANs together. Settings Click Survey
7 After the settings above, please go to Network Settings on page 8 to continue the configuration. E. Client Mode Introduction In this mode, the
8 After the settings above, please go to Network Settings on page 8 to continue the configuration. Network Settings Find the SSID of the Ac
9 Congratulations! You have completed the setup. Click OK Note To change to another mode, please refer to T3 in Troubleshooting on page 10 to
Kommentare zu diesen Handbüchern