TP-LINK TL-WR840N Spezifikationen PDF herunterladen (Seite 17)

TL-WR840N

300Mbps Wireless N Router User Guide

- 8 -

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your TL-WR840N 300Mbps

Wireless N Router using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default domain name of the TL-WR840N 300Mbps Wireless N Router is http://tplinklogin.net,

the default IP address is 192.168.0.1, and the default Subnet Mask is 255.255.255.0. These

values can be changed as you desire. In this guide, we use all the default values for description.

Connect the local PC to the LAN ports of the Router. And then you can configure the IP address

for your PC in the following two ways.

 Configure the IP address manually

1) Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this,

please refer to Appendix B: "Configuring the PC"

2) Configure the network parameters. The IP address is 192.168.0.xxx ("xxx" is any number

from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1 (The

Router's default IP address)

 Obtain an IP address automatically

1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.

If you need instructions as to how to do this, please refer to

Appendix B: "Configuring the

PC”.

2) Then the built-in DHCP server will assign IP address for the PC.

Now, you can run the Ping command in the command prompt to verify the network connection

between your PC and the Router. The following example is in Windows 2000 OS.

Open a command prompt, and type ping 192.168.0.1, and then press Enter.

 If the result displayed is similar to the Figure 3-1, it means the connection between your PC

and the Router has been established well.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 103 104

Keine Kommentare

TP-LINK TL-WR840N Spezifikationen Seite 17