Tp-link TL-SG3109 Bedienungsanleitung Seite 36

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 120
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 35
28
29
Figure 36: Radius Page
The Default Parameters section of the Radius Page
contains the following elds:
Retries Denes the number of transmitted requests
sent to the RADIUS server before a failure occurs.
Possible eld values are 1-10. The default value is 3.
Timeout for Reply Defines the amount of time
(in seconds) the device waits for an answer from the
RADIUS server before retrying the query, or switching to
the next server. Possible eld values are 1-30. The default value is 3.
Dead Time Denes the default amount of time (in minutes) that a RADIUS server is bypassed for service requests.
The range is 0-2000. The default value is 0.
Key String Defines the default key string used for authenticating and encrypting all RADIUS communications
between the device and the RADIUS server. This key must match the RADIUS encryption.
Source IP Address Denes the default IP address of a device accessing the RADIUS server.
The Radius Page also contains the following elds:
IP Address Lists the RADIUS server IP addresses.
Priority Displays the RADIUS server priority. The possible values are 1-65535, where 1 is the highest value. The
RADIUS server priority is used to congure the server query order.
Authentication Port Identies the authentication port. The authentication port is used to verify the RADIUS server
authentication. The authenticated port default is 1812.
Number of Retries Denes the number of transmitted requests sent to the RADIUS server before a failure occurs.
The possible eld values are 1-10. Three is the default value.
Timeout for Reply Denes the amount of time (in seconds) the device waits for an answer from the RADIUS server
before retrying the query, or switching to the next server. The possible eld values are 1-30. Three is the default value.
Dead Time Denes the amount of time (in minutes) that a RADIUS server is bypassed for service requests. The
range is 0-2000. The default is 0 minutes.
Source IP Address Denes the source IP address that is used for communication with RADIUS servers.
Usage Type Species the RADIUS server authentication type. The default value is All. The possible eld values are:
Log in Indicates the RADIUS server is used for authenticating user name and passwords.
802.1X Indicates the RADIUS server is used for 802.1X authentication.
All Indicates the RADIUS server is used for authenticating user names and passwords, and 802.1X port
authentication.
Remove Removes a RADIUS server. The possible eld values are:
Checked Removes the selected RADIUS server.
Unchecked Maintains the RADIUS servers. This is the default value.
2. Click . The Add Radius Server Page opens:
Figure 37: Add Radius Server Page
3. Dene the elds.
4. Click . The RADIUS server is added, and the
device is updated.
To modify RADIUS server settings:
Seitenansicht 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare