TP-LINK TL-SG5428 Betriebsanweisung PDF herunterladen (Seite 141)

128

storm-control multicast

Description

The storm-control multicast command is used to enable the multicast control

function. To disable the multicast control function, please use no storm-control

multicast command. Multicast control function allows the switch to filter

multicast in the network. If the transmission rate of the multicast packets

exceeds the set bandwidth in the storm-control rate

, the packets will be

automatically discarded to avoid network broadcast storm.

Syntax

storm-control multicast

no storm-control multicast

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the multicast control function for port 5:

TL-SG5428(config)# interface gigabitEthernet 1/0/5

TL-SG5428(config-if)# storm-control multicast

storm-control unicast

Description

The storm-control unicast command is used to enable the unicast control

function. To disable the unicast control function, please use no storm-control

unicast command. Unicast control function allows the switch to filter UL frame

in the network. If the transmission rate of the UL frames exceeds the set

bandwidth in the storm-control rate

, the packets will be automatically

discarded to avoid network broadcast storm.

Syntax

storm-control unicast

no storm-control unicast

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 238 239

Keine Kommentare

TP-LINK TL-SG5428 Betriebsanweisung Seite 141