TP-LINK TL-WA801ND V2 Betriebsanweisung PDF herunterladen (Seite 78)

TL-WA801ND

300Mbps Wireless N Access Point User Guide

5) Select Use the following IP address, enter the 192.168.0.100 into the IP address field,

255.255.255.0 into the Subnet mask field.

Now, try to log on to the Web-based configuration page again after the above settings have

been configured. If you still cannot access the configuration page, please restore your Access

Point’s factory default settings and reconfigure your Access Point following the instructions of

this UG. Please feel free to contact our Technical Support if the problem persists.



Note:

While the reconfiguration is done, you need to change the IP address settings as below. Then,

with the correct hardware connection, you can surf the Internet successfully.

1 2 ... 73 74 75 76 77 78 79 80 81 82

Keine Kommentare

TP-LINK TL-WA801ND V2 Betriebsanweisung Seite 78