Tp-link TL-SG3109 Bedienungsanleitung Seite 101

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 120
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 100
94
95
Packets with Errors Displays the number of error packets received from the selected interface.
Transmit Statistics
Total Bytes (Octets) Displays the number of octets transmitted from the selected interface.
Unicast Packets Displays the number of Unicast packets transmitted from the selected interface.
Multicast Packets Displays the number of Multicast packets transmitted from the selected interface.
Broadcast Packets Displays the number of Broadcast packets transmitted from the selected interface.
2. Select an interface in the Interface eld. The interface statistics are displayed.
To reset interface statistics counters:
1. Open the Interface Statistics Page.
2. Click . The interface statistics counters are cleared.
15.1.2 Viewing Etherlike Statistics
The Etherlike Statistics Page contains interface statistics.
To view Etherlike interface statistics:
1. Click System > Statistics > Interface Statistics > Etherlike. The Etherlike Statistics Page opens:
Figure 133: Etherlike Statistics Page
The Etherlike Statistics Page contains the following elds:
Interface Indicates the device for which statistics are
displayed. The possible eld values are:
Port Denes the specic port for which Etherlike
statistics are displayed.
LAG Denes the specic LAG for which Etherlike
statistics are displayed.
Refresh Rate Defines the amount of time that
passes before the interface statistics are refreshed. The
possible eld values are:
15 Sec Indicates that the Etherlike statistics are refreshed every 15 seconds.
30 Sec Indicates that the Etherlike statistics are refreshed every 30 seconds.
60 Sec Indicates that the Etherlike statistics are refreshed every 60 seconds.
No Refresh Indicates that the Etherlike statistics are not refreshed.
Frame Check Sequence (FCS) Errors Displays the number of FCS errors received on the selected interface.
Single Collision Frames Displays the number of single collision frames received on the selected interface.
Late Collisions Displays the number of late collision frames received on the selected interface.
Excessive Collisions Displays the number of excessive collisions received on the selected interface.
Internal MAC Transmit Errors Displays the number of internal MAC transmit errors on the selected interface.
Oversize Packets Displays the number of oversized packet errors on the selected interface.
Internal MAC Receive Errors Number of internal MAC received errors on the selected interface.
Received Pause Frames Displays the number of received paused frames on the selected interface.
Transmitted Paused Frames Displays the number of paused frames transmitted from the selected interface.
2. Select an interface (Port or LAG) in the Interface eld. The Etherlike statistics are displayed.
Seitenansicht 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare