Tp-link TL-SG3109 Bedienungsanleitung PDF herunterladen (Seite 42)

Figure 46: Multiple Hosts Page

The Multiple Hosts Page contains the following elds:

Port — Displays the port number for which advanced

port-based authentication is enabled.

Multiple Hosts — Indicates whether multiple hosts

are enabled. Multiple hosts must be enabled in order

to either disable the ingress-filter, or to use port-lock

security on the selected port. The possible eld values

are:

– Multiple — Multiple hosts are enabled.

– Disable — Multiple hosts are disabled.

Action on Violation — Denes the action to be applied to packets arriving in single-host mode, from a host whose MAC

address is not the supplicant MAC address. The possible eld values are:

– Forward — Forwards the packet.

– Discard — Discards the packets. This is the default value.

– Shutdown — Discards the packets and shuts down the port. The port remains shut down until reactivated, or until the

device is reset.

Traps — Indicates if traps are enabled for Multiple Hosts. The possible eld values are:

– True — Indicates that traps are enabled for Multiple hosts.

– False — Indicates that traps are disabled for Multiple hosts.

Trap Frequency — Denes the time period by which traps are sent to the host. The Trap Frequency (1-1000000) eld

can be dened only if multiple hosts are disabled. The default is 10 seconds.

Status — Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The possible eld

values are:

– Unauthorized — Indicates that either the port control is Force Unauthorized and the port link is down, or the port

control is Auto but a client has not been authenticated via the port.

– Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port access.

– Single-host Lock — Indicates that the port control is Auto and a single client has been authenticated via the port.

– No Single Host — Indicates that Multiple Host is enabled.

Number of Violations — Indicates the number of packets that arrived on the interface in single-host mode, from a host

whose MAC address is not the supplicant MAC address.

2. Click . The Multiple Host Settings Page opens:

Figure 47: Multiple Host Settings Page

3. Dene the elds.

4. Click . The multiple host settings are saved,

and the device is updated.

5.2.2.3 Dening Authentication Hosts

The Authenticated Hosts Page contains a list of

authenticated users.

To dene authenticated users:

1. Click System > Network Security > Authentication > Authenticated Hosts. The Authenticated Hosts Page opens:



1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 119 120

Keine Kommentare

Tp-link TL-SG3109 Bedienungsanleitung Seite 42