TP-LINK TL-WR2543ND Spezifikationen PDF herunterladen (Seite 17)

TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router

- 10 -

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your 450Mbps Dual-Band

Wireless N Gigabit Router using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default domain name of the Router is http://tplinklogin.net and the default Subnet Mask is

255.255.255.0. These values can be changed as you desire. In this guide, we use all the default

values for description.

Connect the local PC to the LAN ports of the Router and then you can configure the IP address for

your PC by the following method: Set up the TCP/IP Protocol in "Obtain an IP address

automatically" mode on your PC. If you need instructions as to how to do this, please refer to

Appendix B: "Configuring the PC”.

Then the built-in DHCP server will assign IP address for the

PC.

Now, you can run the Ping command in the command prompt to verify the network connection

between your PC and the Router. The following example is in Windows 2000 OS.

Open a command prompt, and type ping 192.168.0.1, and then press Enter.

¾ If the result displayed is similar to the Figure 3-1, it means the connection between your PC

and the Router has been established well.

Figure 3-1 Success result of Ping command

¾ If the result displayed is similar to Figure 3-2, it means the connection between your PC and

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 127 128

Keine Kommentare

TP-LINK TL-WR2543ND Spezifikationen Seite 17