TP-LINK TL-WR2543ND Spezifikationen PDF herunterladen (Seite 35)

TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router

- 28 -

¾ Time-based Connecting - The connection will only be established in the period from the

start time to the end time (both are in HH:MM format).

)

Note:

Only when you have configured the system time on “System Tools → Time” page, will the

Time-based Connecting function can take effect.

¾ Connect Manually - You can click the Connect/Disconnect button to connect/disconnect

immediately. This mode also supports the Max Idle Time function as Connect on Demand

mode. The Internet connection can be disconnected automatically after a specified inactivity

period and re-established when you attempt to access the Internet again.

Click the Connect button to connect immediately. Click the Disconnect button to disconnect

immediately.

Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle

Time because some applications are visiting the Internet continually in the background.

If you want to do some advanced configurations, please click the Advanced button, and the page

shown in Figure 4-9 will then appear:

Figure 4-9 PPPoE Advanced Settings

¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not

recommended that you change the default MTU Size unless required by your ISP.

¾ Service Name/AC Name - The service name and AC (Access Concentrator) name should

not be configured unless you are sure it is necessary for your ISP.

In most cases, leaving

these fields blank will work.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 127 128

Keine Kommentare

TP-LINK TL-WR2543ND Spezifikationen Seite 35