TP-LINK TL-WR2543ND Spezifikationen PDF herunterladen (Seite 57)

TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router

- 50 -

4.7 DHCP

Figure 4-28 The DHCP menu

There are three submenus under the DHCP menu (shown in Figure 4-28), DHCP Settings,

DHCP Clients List and Address Reservation. Click any of them, and you will be able to

configure the corresponding function.

4.7.1 DHCP Settings

Choose menu “DHCP → DHCP Settings”, you can configure the DHCP Server on the page as

shown in Figure 4-29.The Router is set up by default as a DHCP (Dynamic Host Configuration

Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to

the Router on the LAN.

Figure 4-29 DHCP Settings

¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must

have another DHCP server within your network or else you must configure the computer

manually.

¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.0.100 is the default start address.

¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP

addresses. 192.168.0.199 is the default end address.

¾ Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the Router with their current dynamic IP Address. Enter the

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 127 128

Keine Kommentare

TP-LINK TL-WR2543ND Spezifikationen Seite 57