TP-LINK TL-WR2543ND Spezifikationen PDF herunterladen (Seite 61)

TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router

- 54 -

¾ Shared - Indicates the shared or non-shared status of the volume. When the volume is

shared, you can click the Disable to stop sharing the volume; when volume is

non-shared, you can click the Enable button to share the volume.

Click the Start button to start the Network Sharing service.

Click the Stop button to stop the Network Sharing service.

Click the Eject Disk button to safely remove the USB storage device that is connected to USB

port. This takes the drive offline. A message (as shown in Figure 4-35) will appear on your web

browser when it is safe to detach the USB disk.

Figure 4-35 Safe Unplug Message

Click the Rescan button to start a new scan.

Follow the instructions below to set up your Router as a file server:

1. Plug an external USB hard disk drive or USB flash drive into this Router.

2. Click the Rescan button to find the USB drive that has been attached to the Router.

3. Click the Start button to start the Storage Sharing service.

4. Click the Enable button under Shared to enable the disk to share.

5. Click the Open the disk to visit the sharing disk.

)

Note:

1. The Router cannot automatically locate new USB drive. You have to click the Rescan button

manually to display a list of volumes and information about them.

2. The new settings will not take effect until you restart the service.

3. To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the

USB port can cause damage to the device and loss of data.

4. Mounted volumes are subject to the 8-volume limit. So you cannot access more than 8

volumes on the USB storage device.

4.8.2 FTP Server

Choose menu “USB Settings→FTP Server”, you can create an FTP server that can be accessed

from the Internet or your local network.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 127 128

Keine Kommentare

TP-LINK TL-WR2543ND Spezifikationen Seite 61