TP-LINK TL-WR2543ND Spezifikationen PDF herunterladen (Seite 42)

TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router

- 35 -

Figure 4-13 LAN

¾ MAC Address - The physical address of the Router, as seen from the LAN. The value can't

be changed.

¾ IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation

(factory default: 192.168.0.1).

¾ Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.

)

Note:

1) If you change the IP Address of LAN, you must use the new IP Address to log in the Router.

2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP

server will change accordingly at the same time，while the Virtual Server and DMZ Host will

not take effect until they are re-configured.

4.5.3 MAC Clone

Choose menu “Network → MAC Clone”, you can configure the MAC address of the WAN on

the screen below, Figure 4-14:

Figure 4-14 MAC Address Clone

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely

needed here.

¾ WAN MAC Address - This field displays the current MAC address of the WAN port. If your

ISP requires you to register the MAC address, please enter the correct MAC address into

this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 127 128

Keine Kommentare

TP-LINK TL-WR2543ND Spezifikationen Seite 42